Wednesday, 22 January 2020 - 9:15am
Latest Projects

The ballast component was at the end of its lifecycle - contaminated and broken. The track had a mix of timber and concrete sleepers as well as a mix of dog spikes and screw spikes, so was due for renewal. 

Geofabrics bidim and TriAx geogrid was specified due to previous projects success. 

The pit renewal started with the removal of approximately 300 mm of contaminated ballast back to the capping layer. In this instance, the capping layer was in relatively good condition so it only needed to be compacted. The contractor then placed a separation layer of bidim A44 on top of the newly compacted capping, along with Tensar TX190L geogrid to stabilise and contain the ballast. Once in place, 300 mm of new ballast was brought in and placed on top along with sleepers and new rail.

The station pit has now been completely revitalised with the selected solution, saving the client a lot of money in the long term. 

By installing a separation layer between the capping and ballast in conjunction with TX190L, it will minimise the ongoing maintenance costs and massively extend the life of the new ballast that has been put in place.



Toorak Station Pit Renewal 



Related News

Related Products

Related Sectors