GrassProtecta large.jpg


Polyethylene mesh for grass surface protection under traffic loads

GrassProtecta® is a heavy duty thick polyethylene mesh for reinforcing grassed surfaces prone to wear, rutting and smearing. GrassProtecta® allows the grass sward to intertwine with the mesh filaments creating a strong, discreetly reinforced surface capable of withstanding vehicle loads, limiting damage and reducing soil compaction. GrassProtecta® is the perfect alternative to impermeable paved surfaces where natural grassed traffic routes and driveways are preferred such as those found on golf courses or where planning restrictions are applied or cost savings are being considered.




GrassProtecta® is a heavy duty thick polyethylene mesh manufactured from partly recycled UV stabilised polyethylene (minimum 20% recycled polymer). It is green in colour and is supplied in 11mm and 14mm thick mesh sizes.


Installation is simple where GrassProtecta® is laid over the existing grass surface that has been cut short. GrassProtecta® is then pinned to the surface allowing the grass to grow through the apertures. GrassProtecta® can also be installed onto new landscaped areas and seeded as required. This makes it a cost effective solution for temporary grass car parks, pedestrian and wheelchair access routes and other lightly trafficked surfaces.


  • High polymer density to limit mesh deformation
  • High resistance to weathering and UV
  • High tensile strength to limit soil compaction


Supplied in the following grades

Grade Roll Size Thickness
GrassProtecta® Standard 1m x 10m
2m x 20m
GrassProtecta® Heavy 1m x 10m
2m x 20m